The repair of large drywall holes is different compared to the repair of a small hole. An original plasterboard patch should be made, including the structural support of the patch. The section of the drywall must be larger than the damaged area so that it is not missing. Compared to a small hole that only needs to be covered with an adhesive mesh.
Although holes that are larger than 8 inches are recommended to use drywall. Also verify that the area where the patch was installed is clean and tidy. The patch should be held on both sides of the opening with wooden support for maximum strength. The mesh tape is used to adjust small repairs, however, it is not practical.
Remove waste from drywall
Remember that it is worthwhile to clean the sanding dust as it is irritating. It is necessary to use chemistry to clean dust or when sanding to avoid breathing gypsum particles. Use a damp sponge wipe to remove dust from drywall.
There are two most common compounds that are light and multiple, it is easy to work with either. They have a shelf life at room temperature with a proximity of 9 months. The difference between the two is that one product is lighter than the other. The patch is an aluminum screen covered with fiberglass mesh.
Preference of drywall
Most homes and buildings have dry walls such as interior walls, including ceilings. Therefore, it has become one of the options for construction due to its easy installation and stability. To achieve a project with good results you know you need an experienced contractor. One that already has many years of knowledge in repairing drywall. Remember to ask important questions about the project and any doubts you may have. It will help you guarantee a successful project for your home.